Aircraft

Gulfstream vs Bombardier Jets Compared Tier by Tier

Gulfstream vs Bombardier, matched tier by tier on listed figures

There is no maker-level winner between Gulfstream and Bombardier. Each maker leads on different tiers by different measures. In the figures on this site, the G280 lists more range and top speed than the Challenger 350 but a narrower cabin. The G800 lists 8,200 nautical miles (nm) of range against 8,000 nm for the Global 8000, and the Global 8000 lists the faster top speed at Mach 0.95 against Mach 0.935. Choose by the tier you need, the range basis the figure uses, and whether an operator can put a specific tail on your date.

At Jet & Beyond, we lined up the specification figures already published on this site’s individual aircraft pages, tier by tier. We ran no tests and no flight trials. The figures come from manufacturer pages, range figures on instrument flight rules (IFR) reserves, broker rate cards and market reports, with estimates labelled. Where a figure is missing from our source sheet, the page says so instead of filling it in.

Gulfstream vs Bombardier at a Glance

There is no maker-level winner. Gulfstream and Bombardier each list different aircraft in each size tier, and each maker leads on different measures. Compare tier against tier: the super-midsize pair, the large-cabin prior generation, and the ultra-long-range flagships. Within the super-midsize tier, the G280 lists more range and top speed than the Challenger 350, but its cabin is narrower. Within the flagship tier, the G800 lists the longer range and the Global 8000 lists the faster top speed. The range bases differ, as the table notes.

International Standard Atmosphere (ISA) is the reference atmosphere behind some range figures. The table uses the figures recorded on each aircraft page on this site.

Tier Aircraft Range (listed basis) Top speed (Mmo) Cabin (height x width x length) Passengers Production status Price and charter basis
Super-midsize Gulfstream G280 3,600 nm, 4 passengers, Mach 0.80 Mach 0.85 6 ft 1 in x 6 ft 11 in x 25 ft 10 in Up to 10; 8 to 9 typical in charter In production; successor arrives 2027 List about $24.5M; charter about $6,000 to $9,500 per hour
Super-midsize Bombardier Challenger 350 3,200 nm, 8 passengers, Mach 0.80 Mach 0.83 6 ft 0 in x 7 ft 2 in x 25 ft 2 in Up to 10 Production ended 2022 List about $26.7M (2022 list); charter about $5,000 to $6,500 per hour
Super-midsize Bombardier Challenger 3500 3,400 nm, IFR reserve basis Mach 0.83 Same as Challenger 350 Up to 10 In production since December 2022 New about $27M to $28M (market report); charter about $5,500 to $7,000 per hour (market estimate)
Large-cabin, prior generation Gulfstream G550 6,750 nm; passenger and reserve basis not stated on this site Mach 0.885 Cabin height 6 ft 2 in; width and length not stated Up to 19 Out of production since 2021 Charter about $8,000 to $10,000 per hour (broker rate cards)
Large-cabin, prior generation Bombardier Global 6000 6,000 nm at Mach 0.85, IFR reserve basis Mach 0.89 6 ft 2 in x 7 ft 11 in x 43 ft 3 in (excluding baggage) Up to 19 Out of production since 2019 Pre-owned about $23M to $40M; charter about $11,500 to $14,000 per hour
Large-cabin, prior generation Gulfstream G650 / G650ER 7,000 nm (G650) and 7,500 nm (G650ER) at Mach 0.85 Mach 0.925 6 ft 3 in x 8 ft 2 in x 46 ft 10 in; length basis not stated Up to 19 Production ended February 2025 Pre-owned about $40M to $55M; charter about $11,000 to $15,000 per hour
Flagship Gulfstream G700 7,750 nm at Mach 0.85; 6,650 nm at Mach 0.90 Mach 0.935 6 ft 3 in x 8 ft 2 in x 56 ft 11 in Up to 19; sleeps up to 13 Type certificate March 29, 2024; multi-year order backlog Market reports $78M to $80M (Gulfstream does not publish); charter about $13,000 to $16,000 per hour
Flagship Bombardier Global 7500 7,700 nm at Mach 0.85, IFR reserve basis Mach 0.925 6 ft 2 in x 8 ft 0 in x 54 ft 5 in Up to 19; 12 to 16 typical Entered service 2018; roughly 200 delivered New about $75M to $78M (reported estimates); pre-owned average asking about $50M; charter about $12,500 to $15,500 per hour
Flagship Gulfstream G800 8,200 nm at Mach 0.85; 8,000 nm at Mach 0.87 Mach 0.935 6 ft 3 in x 8 ft 2 in x 46 ft 10 in Up to 19 Certified April 16, 2025 Base about $72M; about $95M to $100M equipped (market reports); charter about $14,000 to $18,000 per hour
Flagship Bombardier Global 8000 8,000 nm at Mach 0.85; 8 passengers, 4 crew, IFR reserves, ISA Mach 0.95; ultra-high-speed cruise Mach 0.92 Not published on the summary sheet used here Up to 19 Transport Canada November 5, 2025; FAA December 19, 2025 New about $78M to $82M (market reports); charter rate cards still emerging

Read the basis before you compare any two range numbers. The G280 figure is on a 4-passenger basis and the Challenger 350 figure on an 8-passenger basis, so the 400 nm gap is not like-for-like. The G550 entry does not state its basis on this site. Price figures follow the same rule. A list price, a market estimate and a pre-owned asking price are three different measures.

Why a Maker-Level Comparison Misleads

A single winner would mislead because the lead changes with the tier and the measure. The Challenger 350 is wider than the G280, at 7 ft 2 in against 6 ft 11 in. In the large-cabin tier the order flips: the G650 is 8 ft 2 in wide against 7 ft 11 in for the Global 6000. In the flagship tier it flips again: the G700 and G800 are 8 ft 2 in wide against 8 ft 0 in for the Global 7500. The Global 8000 has the highest listed top speed, while the G800 has the longest listed flagship range. A maker-level verdict would hide those reversals.

Use this order to compare the two makers fairly:

  1. Start with the tier. The super-midsize aircraft list up to 10 passengers. The large-cabin and flagship aircraft list up to 19.
  2. Put range figures on one passenger count and one reserve basis before you compare them.
  3. Compare prices of the same kind: list with list, market estimate with market estimate, and pre-owned asking with pre-owned asking.
  4. Note production status. The G280 and Challenger 3500 are in production. The G550, Global 6000, G650 and Challenger 350 have ended production.

Super-Midsize G280 vs Challenger 350 and 3500

The G280 lists 3,600 nm of range with 4 passengers at Mach 0.80. The Challenger 350 lists 3,200 nm with 8 passengers at Mach 0.80. Those figures are on different passenger counts, so the 400 nm gap is not like-for-like. The G280 lists a typical cruise of Mach 0.80, and the Challenger 350 lists Mach 0.80 for its range figure. The G280 lists the higher maximum operating speed, Mach 0.85 against Mach 0.83.

The cabins differ in shape. The G280 cabin is 6 ft 1 in high, 6 ft 11 in wide and 25 ft 10 in long. The Challenger 350 cabin is 6 ft 0 in high, 7 ft 2 in wide and 25 ft 2 in long. The G280 is taller and longer, and the Challenger is wider. Both list up to 10 passengers, and the G280 lists 8 to 9 typical in charter. The G280 offers 120 cubic feet of in-flight accessible baggage. The Challenger 350 offers 106 cubic feet that is heated, pressurized and accessible. The G280 uses two engines rated at 7,624 pounds-force each. The Challenger 350 uses two rated at 7,323 pounds-force each.

The G280 is in production, and its successor arrives in 2027. The Challenger 350 ended production in 2022 and was succeeded by the Challenger 3500. The 3500 has been in production since December 2022, lists 3,400 nm of range on an IFR reserve basis, and shares the 350’s cabin and engines. Prices differ by measure: the G280 lists at about $24.5M, the Challenger 350 at about $26.7M on its 2022 list, and the Challenger 3500 at about $27M to $28M new in a 2026 market report. Broker charter brackets run $6,000 to $9,500 per hour for the G280, $5,000 to $6,500 for the Challenger 350, and $5,500 to $7,000 for the Challenger 3500 (market estimate). The side-by-side page for this pair is Challenger 350 vs G280.

G550 and G650 vs Global 6000 in the Large-Cabin Tier

The G550 lists 6,750 nm of range and a maximum operating speed of Mach 0.885. The Global 6000 lists 6,000 nm at Mach 0.85 on an IFR reserve basis and a maximum operating speed of Mach 0.89. This site does not state the G550 passenger or reserve basis, so the 750 nm difference is not like-for-like. Both carry up to 19 passengers, and both list a cabin height of 6 ft 2 in.

The G650 and G650ER list 7,000 nm and 7,500 nm respectively at Mach 0.85, with a maximum operating speed of Mach 0.925. The G650 cabin is 6 ft 3 in high, 8 ft 2 in wide and 46 ft 10 in long. The Global 6000 cabin is 6 ft 2 in high, 7 ft 11 in wide and 43 ft 3 in long, excluding baggage. This site does not state whether the G650 length includes baggage, so the two lengths should not be compared directly. Both the Global 6000 and the G650 were certified in 2012, and the G650ER in 2014.

Production has ended for the Global 6000 and the G650. The G550 has been out of production since 2021, the Global 6000 since 2019, and the G650 since February 2025. Pre-owned prices run about $40M to $55M for the G650 and about $23M to $40M for the Global 6000. The Global 6000 active fleet is roughly 330 aircraft, counting Global Express, against more than 400 G650ER aircraft in the active fleet. These counts cover different scopes and are not a like-for-like fleet comparison. Charter brackets are $8,000 to $10,000 per hour for the G550, $11,500 to $14,000 for the Global 6000, and $11,000 to $15,000 for the G650. More on these pairs is on Global 6000 vs G650 and G550 vs G650.

G700 and G800 vs Global 7500 and Global 8000 in the Flagship Tier

The G700 lists 7,750 nm at Mach 0.85 and 6,650 nm at Mach 0.90. The Global 7500 lists 7,700 nm at Mach 0.85 on an IFR reserve basis. The 50 nm gap is listed, and this site does not state the G700 passenger or reserve basis. The G700 maximum operating speed is Mach 0.935, and the Global 7500 is Mach 0.925.

The G700 cabin is 6 ft 3 in high, 8 ft 2 in wide and 56 ft 11 in long, with up to 5 living areas. The Global 7500 cabin is 6 ft 2 in high, 8 ft 0 in wide and 54 ft 5 in long, with 4 living zones. Both list up to 19 passengers. The G700 sleeps up to 13, and the Global 7500 lists 12 to 16 passengers as typical. The G700 uses two engines rated at 18,250 pounds-force each, and the Global 7500 uses two rated at 18,920 pounds-force each. The G700 received its type certificate on March 29, 2024, and has a multi-year order backlog. The Global 7500 entered service in 2018, with roughly 200 delivered. Market reports put the G700 at about $78M to $80M, and Gulfstream does not publish that price. The Global 7500 is about $75M to $78M new in reported estimates, with a pre-owned average asking price of about $50M. Charter brackets are $13,000 to $16,000 per hour for the G700 and $12,500 to $15,500 for the Global 7500. The pair page is Global 7500 vs G700.

The G800 lists 8,200 nm at Mach 0.85, 8,000 nm at Mach 0.87, and 7,000 nm at Mach 0.90. The Global 8000 lists 8,000 nm at Mach 0.85 with 8 passengers and 4 crew, on IFR reserves and ISA conditions. This site does not state the G800 range basis, so the 200 nm difference is not like-for-like. The G800 maximum operating speed is Mach 0.935, and the Global 8000 is Mach 0.95. The Global 8000 also lists an ultra-high-speed cruise of Mach 0.92. Both list a maximum cruise altitude of 51,000 ft.

The G800 cabin is 6 ft 3 in high, 8 ft 2 in wide and 46 ft 10 in long, with up to 4 living areas and up to 19 passengers. Bombardier did not publish cabin dimensions or engine data on the summary sheet used for the Global 8000, so this site cannot compare that cabin’s size. The Global 8000 cabin altitude is 2,691 ft at a 41,000 ft cruise. The G800 was certified on April 16, 2025. The Global 8000 was certified by Transport Canada on November 5, 2025 and by the FAA on December 19, 2025, and its charter rate cards are still emerging. The G800 base price is about $72M, and about $95M to $100M fully equipped, both from market reports. The Global 8000 is about $78M to $82M new, also from market reports. The G800 charter bracket is $14,000 to $18,000 per hour. Pair pages are G800 vs Global 8000 and G700 vs Global 8000.

Availability and Price

Price types differ across the table. Only two aircraft carry a list price on this site: the G280 at about $24.5M, and the Challenger 350 at about $26.7M on its 2022 list. Every other figure is a market estimate, a reported estimate or a pre-owned asking price, and none of those is a quote. Gulfstream does not publish a G700 price.

The G280 and Challenger 3500 are in production. The G550, Global 6000, G650 and Challenger 350 are out of production. The G700 has a multi-year order backlog. The Global 8000 was certified in late 2025, and its charter rate cards are still emerging. For a new order, production status and backlog are the two figures to read first.

How Access Works for Charter and Jet Card Customers

The charter brackets above come from broker rate cards and market estimates. They are not quotes, and they do not say which tail an operator will fly. Ask the operator which tail and which variant it will fly before you commit to a tier. A quote should name both. The source sheet behind this page does not say which operators hold which types, so a maker name on a page does not tell you which aircraft you will board.

See the jet card comparison page for jet card options. For charter pricing, see private jet charter cost. Fractional shares are covered on the fractional jet ownership page.

Who Should Choose Which Tier

  • Choose the G280 if you want the higher listed top speed of Mach 0.85 and 120 cubic feet of in-flight accessible baggage. Its 3,600 nm range is on a 4-passenger basis.
  • Choose the Challenger 350 or Challenger 3500 if you want the wider 7 ft 2 in cabin. The 3500 is in production and lists 3,400 nm on an IFR reserve basis.
  • Choose the G650 if the 8 ft 2 in wide large cabin matters for your trip. Production ended in February 2025, and pre-owned prices run about $40M to $55M.
  • Choose the Global 6000 if you want the lower pre-owned price range, about $23M to $40M against about $40M to $55M for the G650 (both market estimates). The G650 lists the higher top speed.
  • Choose the G800 if you want the longest listed flagship range, 8,200 nm at Mach 0.85.
  • Choose the G700 if you want the longest listed cabin among the flagships with published dimensions, 56 ft 11 in (length basis not stated).
  • Choose the Global 8000 if you want the highest listed top speed, Mach 0.95, and can accept that its cabin dimensions and engine data are not published on this site.

Who This Is Not For

We do not name a winner, so this comparison does not suit a buyer who wants one maker picked over the other. It does not suit a buyer who needs more than 10 passengers in the super-midsize tier, because the G280 and Challenger lists top out at 10. A buyer who needs a Global 8000 cabin or engine figure should ask for quotes on the aircraft they would fly, since Bombardier did not publish those figures on this site’s summary sheet.

What Would Change Our Answer

  • A range figure from each maker for the same tier, on the same passenger count and reserve basis. The G280 and Challenger 350 gap would then compare directly.
  • Published cabin dimensions and engine data for the Global 8000, which would allow a cabin comparison with the G800 and G700.
  • A published charter rate for the Global 8000 in place of rate cards that are still emerging.
  • A list price for the G700 from Gulfstream, which the maker does not publish.
  • A quote for a specific tail that shows a different type or cabin than the tier you asked for.

Takeaway for Choosing Between Gulfstream and Bombardier

Compare tiers first, then the range basis and price basis inside each tier. The evidence is the set of figures already published on this site’s aircraft pages, which cite manufacturer pages, IFR reserve range conventions, broker rate cards and market reports. We ran no tests and no flight trials. The answer changes if you need a different tier, if the range basis of a figure changes, or if the operator cannot put a specific tail on your date. Ask for quotes on the tail you would fly, and compare Gulfstream vs Bombardier tier by tier using the figures above.

Frequently Asked Questions

Is Gulfstream better than Bombardier?

Neither maker leads in every tier on the figures on this site. Gulfstream lists the wider cabin in the large-cabin tier and in the flagship tier against the Global 7500, while Bombardier lists the wider cabin in the super-midsize tier. Compare the tier you need first, then the range basis and price basis of the two aircraft in it.

Bombardier vs Gulfstream: which has more range?

The listed figures do not give one answer, because passenger counts and reserve bases differ. In the super-midsize tier the G280 lists 3,600 nm at 4 passengers and the Challenger 350 lists 3,200 nm at 8 passengers. In the flagship tier the G800 lists 8,200 nm and the Global 8000 lists 8,000 nm at Mach 0.85, a 200 nm difference, and the G800 basis is not stated on this site.

Which is faster, Gulfstream or Bombardier?

The Global 8000 lists the highest maximum operating speed on this site at Mach 0.95. The G800 and G700 list Mach 0.935, and the G280 lists Mach 0.85 against Mach 0.83 for the Challenger 350 and 3500. These are maximum operating limits, and the G280 lists a typical cruise of Mach 0.80.

Which is cheaper, a Gulfstream or a Bombardier?

The G280 and Challenger 350 are the only two aircraft here with list prices: about $24.5M for the G280 and about $26.7M for the Challenger 350 on its 2022 list. In the flagship tier, the G800 base figure of about $72M is a different measure from the Global 8000 new estimate of $78M to $82M, so compare them only as labeled. These flagship figures are market reports, not quotes.

Which has the wider cabin?

It depends on the tier. The Challenger 350 and 3500 list 7 ft 2 in wide against 6 ft 11 in for the G280. The G650 lists 8 ft 2 in against 7 ft 11 in for the Global 6000. The G700 and G800 list 8 ft 2 in against 8 ft 0 in for the Global 7500. This site does not publish the Global 8000 cabin width.

How do I compare a Gulfstream and a Bombardier fairly?

Compare within one tier, using one passenger count and one range basis. Put list prices against list prices, market estimates against market estimates, and pre-owned asking prices against pre-owned asking prices. Then ask the operator which tail and variant it will fly, and request quotes for that tail.

We update this guide as aircraft, program, and route pricing changes. Spotted something out of date? Tell us and we'll check it.